Palfinger PK11.001 SLD 3 Hydraulic Loader equipped as follows:

-          Mounted behind cab

-          Maximum lifting moment 74,780 ft/lbs

-          2-section hydraulic boom extension to 25’6”

-          Manually extendable outriggers with a spread of 16’0”

-          Paltronic Overload Protection System

-          Single linkage at outer boom

-          Rotation angle 400 degrees

-          4-function Danfoss control valve

-          Dual operator control stations

-          Bubble level at both outrigger control stations

-          Load holding valves on main, outer and extension cylinders

-          Return oil utilization

-          Oil tank 17.2 US gallons mounted at crane base with return filter

-          Two composite outrigger pads with storage brackets

-          180 degree stable over rear

12’ Alum-line body equipped as follows:

-          12’ flatbed

-          3” extruded aluminum I-beam crossmembers on 12” centers

-          Extruded aluminum perimeter bed rail – ½” thing

-          Upgraded to 1-1/4” extruded floor

-          In-frame storage box 10’ between frame truck rails with rear doors

-          3” x 3/8” rub rail and 2/4 stake pockets

-          6” deep rear diamond plate step bumper

-          20” deep side skirt, 0.125” diamond plate material

-          Underbody alum. Diamond plate toolboxes: 60”L x 20”H x 24”D – 1 each side

2019 International 4300 SBA 4x2 chassis equipped as follows:

-          25,500 GVW

-          Cummins B6.7 engine – 250 hp @ 2400 rpm, 660 lb-ft at 1600 rpm

-          Engine block heater

-          Allison automatic transmission

-          Hydraulic brakes

-          50 gallon fuel tank

-          Gear ratio 3.36

-          Rear suspension – single spring 18,500# with 4500# aux rubber spring

-          Driver’s seat – air suspension, high back, vinyl

-          Passenger’s seat – non suspension, high back, vinyl

-          Steel wheels – 19.5x6.75

-          Tires – 245/70R19.5