Palfinger PK 7.001 SLD3 equipped as follows:

- Mounted back of cab

- Maximum lifting moment 6.2mt (44,550 ft-lb)

- 4 section hydraulic boom to 36’ 9”

- Maximum lifting capacities

- 12’- 3,300 lb

- 18’- 2,100 lb

- 24’- 1,480 lb

- 30’- 1,140 lb

- 36’- 930 lb

- Rotation angle 400 degrees

- Single linkage at outer boom

- Single operator control station

- Scanreno radio remote control with 4 section control valve LED load display, 32’ 9” backup cable, battery charger, 2 batteries, and hip and neck strap

- Paltronic overload protection system

- R3X hydraulically extendable telescopic outriggers with a spread of 16’ 10”

- Two PVC outrigger shoes and storage brackets

- Oil tank – 13.2 gallons

- 11.5 hp oil cooler

- Load holding values on main, outer, slewing, and extension cylinders

- Return oil utilization – increases speed of extension cylinder and allows crane to work faster and more efficiently

- KTL Paint Process – the cathodic dip painting – Shot blasted crane parts are covered in zinc phosphate in an immersion process and coated electro-statically two component top coating of paint provides superior surface protection. Painted Traffic Red

- 10’ Tafco aluminum bed with wood floor, underbody tie down rails, and rub rails

- 42” bulkhead

- 57”x24”x96” straight side, diamond treadplate, aluminum crossbody toolbox

- STOCK PHOTOS - NO inverter

- STOCK PHOTOS - NO water tank

MOUNTED ON:

2025 Ford F600 4x4 equipped as follows:

- 22,000 GVWR

- 6.7L 4V OHV Power Stroke V8 Turbo-Diesel B20 – 330 HP @ 2200 RPM, 950 lb/ft torque @ 1800 RPM

- TorqShift 10-speed automatic transmission

- Engine block heater

- Front and rear 19.5” argent steel wheels

- Tires – 245/70Rx19.5G

- Front axle 7,500lbs

- Rear axles 15,500lbs

- 193” wheelbase

- 4-wheel ABS brakes

- Chrome bumper

- 40-gallon fuel tank

- AM/FM stereo with SYNC System

- Power windows and locks with keyless entry

- 40/20/40 split bench seat- vinyl

- Back up camera

- Color white