Used 2011 NOV Hydra Rig HR-680 coiled tubing injector
SOLD
Sales Dept.: 866-458-5915
Last Updated: 06 December 2017
Condition: Very Good
Serial #: CC302450
Unit #: OF-142
Engineered and designed for rugged reliability and reduced maintenance, NOV Hydra Rig injectors are backed by the experience achieved from the manufacturing of over 2,000 injectors.
Whether you are packaging a new, custom-built unit with the HR-680 model injector, or just replacing your existing injector, the HR-680 has the performance and dependability you demand in the toughest oilfield conditions around the world.
Designed to handle 1" to 3 ½" coiled tubing strings, this model is capable of running the new 130,000 psi designs with superior slow speed control (inches per minute). The HR-680 has an 80,000 lbs continuous lifing capacity and 40,000 lbs continuous snubbing capacity.
The drive system and traction system enhances your performance in the field.
Specifications
Max. speed (Min. displacement): 200 f/min
Max. speed (Max. displacement): 108 f/min
Horsepower: 150 hp continuous at 120° F
Lifing capacity through outer frame: 95,000 lbs
Lifing capacity from stripper: 80,000 lbs
Assembled weight (72" gooseneck, stripper box, min. handling slings, lube tank, excludes fall pole, other options): 9,500 lbs
Approx. individual gripper weight: 6 lbs
Drive System
Deep reduction, purpose-built gear drives
Dual hydraulic motor input (variable displacement, piston motors)
Counterbalance valves plumbed directly to motor
Tubing odometer for maintenance and inspection requirements
Dual oil seals on gear drive output shafts for long and reliable service
Dual spring applied/pressure released brakes mounted between the hydraulic drive motors and gear drives
Traction System
Reduced remove/install time with patented "Quick Connect" Gripper System (1-3 seconds)
Hardened and grooved single piece grippers
Elastomeric suspension system for grippers
Reduced maintenance with no greasing of chain bearings required due to "sealed-for-life" design
Purpose-built and simplified direct down tension chain system
Spray type injector chain lubricating system
Improved skate entrance design for smoother chain bearing entry into traction system
CraneWorks, LLC
www.Crane-Works.comContact: Sales Dept.
Phone: 866-458-5915
Fax: 713-491-9359
THIS LISTING HAS SOLD
Condition
Very Good
0 views this week
0 people have saved
Condition
Very Good
Engineered and designed for rugged reliability and reduced maintenance, NOV Hydra Rig injectors are backed by the experience achieved from the manufacturing of over 2,000 injectors.
Whether you are packaging a new, custom-built unit with the HR-680 model injector, or just replacing your existing injector, the HR-680 has the performance and dependability you demand in the toughest oilfield conditions around the world.
Designed to handle 1" to 3 ½" coiled tubing strings, this model is capable of running the new 130,000 psi designs with superior slow speed control (inches per minute). The HR-680 has an 80,000 lbs continuous lifing capacity and 40,000 lbs continuous snubbing capacity.
The drive system and traction system enhances your performance in the field.
Specifications
Max. speed (Min. displacement): 200 f/min
Max. speed (Max. displacement): 108 f/min
Horsepower: 150 hp continuous at 120° F
Lifing capacity through outer frame: 95,000 lbs
Lifing capacity from stripper: 80,000 lbs
Assembled weight (72" gooseneck, stripper box, min. handling slings, lube tank, excludes fall pole, other options): 9,500 lbs
Approx. individual gripper weight: 6 lbs
Drive System
Deep reduction, purpose-built gear drives
Dual hydraulic motor input (variable displacement, piston motors)
Counterbalance valves plumbed directly to motor
Tubing odometer for maintenance and inspection requirements
Dual oil seals on gear drive output shafts for long and reliable service
Dual spring applied/pressure released brakes mounted between the hydraulic drive motors and gear drives
Traction System
Reduced remove/install time with patented "Quick Connect" Gripper System (1-3 seconds)
Hardened and grooved single piece grippers
Elastomeric suspension system for grippers
Reduced maintenance with no greasing of chain bearings required due to "sealed-for-life" design
Purpose-built and simplified direct down tension chain system
Spray type injector chain lubricating system
Improved skate entrance design for smoother chain bearing entry into traction system
Rental Prices
Please contact the dealer for pricing -- 1-866-458-5915
Email Seller
Advertisements