CRANE SPECIFICATION

MODEL: 20010
CAPACITY: 100 ton at 10 feet (90t at 3.0m)
BOOM: 4-section full power synchronized telescoping boom. Synchronized telescoping system consists of two double acting hydraulic cylinders with load holding valves and extension and retraction cables.

• Retracted Length: 42' o· (12.8m)
• Extended Length: 128' O" (39.0 m) • Extension Time: 116 s
• Elevating Angles: -1 ° to 80° • Elevating Time: ·74 s
• Boom Head: Seven, 22 inch (559 mm) diameter cast nylon sheaves on heavy-duty roller bearings. (5 load bearing and 2 lead in sheaves)

AUXILIARY BOOM HEAD:
Quick reeve, single 22 inch (559 mm) diameter high-strength, cast
nylon sheave mounted on a heavy-duty roller bearing.

• Hook Block: 100 ton (90 t) hook block- Five 20 inch (508 mm) diameter sheaves mounted on heavy duty roller bearings with swivel hook and safety latch.
• Headache Ball: 12 ton (11t) ball includes a swivel hook with a safety latch

ENGINE: 

• Make/ Model: Cummins QSM11
• Type: 6 Cylinder, Water cooled, 4 Cycle
• Aspiration: Turbocharged and Aftercooled
• Max.Output: 375 hp (280 kw) @ 2100 RPM
• Max Torque: 1,400 Lb-ft (1,898 Nm)@ 1400 RPM
• Piston Disp: 10.8 liter
• Bore x Stroke:107mm x 124mm
• Emission Cert: U.S. EPA ner 3, Euromot Stage IIIA
• Alternator: 130 amp

OPERATORS CAB
Fully-enclosed, air conditioned all-steel modular cab with lockable swinging door, acoustical lining, anti-slip floor and tinted safety glass.

• Cab tilts 20° .
• Rear view cameras are appropriately located as are three remote control work lights.
• Vent window in the rear of the cab.
• Grab bars and steps are located for easy access to the cab.
• Defroster, heater, circulating fan
• 2-speed windshield wiper, top glass wiper
• Six-way adjustable fabric seat with headrest, seat belt
• Dome light
• Dry-chemical fire extinguisher
• Two-way armrest mounted hydraulic joysticks control swing, , main winch, auxiliary winch. and boom hoist. Hydraulic foot pedals control the travel, boom extend, and swing service brake functions.
• Seat and armrest termination switches immediately disable all hydraulic functions as the operator rises from the seat or lifts the left hand armrest.

For More Information, Contact Tulani Ruffin at (214) 365-6978