2015 Manitex Carry Deck Industrial Crane
Renegar-Driggers Machinery Co., Inc.
Bob Renegar: 423-593-2067
Last Updated: 13 Sep 2023
Bob Renegar: 423-593-2067
Last Updated: 13 Sep 2023
Price: $75,000
Location: Cleveland, Tennessee, United States
Year: 2015
Capacity: 10.00
Condition: New
Capacity: 10.00
Condition: New
TECHNICAL DESCRIPTIONS & OPTIONS
Operator’s Station
Frame mounted non-vibrating open style operator’s control station
Standard features:
Weather resistant seat
Hour meter
Dash panel includes:
Engine water temperature gauge
Fuel gauge
Tachometer, Check engine light, Engine Stop Light, Outrigger position indicator, wheels centered indicator
Operator aids
Graphic interface for load indicator
Load Moment Indicator (LMI)
Anti-Two Block Device (ATB)
Rated Capacity Limiter (RCL)
Boom
Boom length: 3-section 25.4 ft. (7,7 m) 2-sheave quick reeve boom point
Full power mechanically synchronized
Boom max. tip height: 33 ft. (10,1 m)
Boom angle (min/max): 0° / 69°
Hydraulics
Winch section 29 gpm, Auxiliary section 16 gpm @ 2500 rpm.
Hydraulic oil reservoir capacity: 50 gal. (189 L)
Maximum system operation pressure: 2000 psi
Return line filter with full flow by-pass protection and service indicator
Engine
PSI 3.0L Dual Fuel
Rated power: 70 hp (52.1 kW) @ 2500 rpm
Fuel type: Gas / LP
Fuel tank capacity: 16 gal. (60.6 L)
Tires
H16 Pneumatic 255/70 R22.5
Drive-line
DANA syncromesh 4-speeds forward and 3 reverse with electrical steer model 1102FT12410
Steering
2-wheel, 4-wheel and crab steer with manual alignment
4x2-Front axle drive with planetary hubs and limited slip differential
Front: DANA 212 planetary steer with internal multi-wet-disc brakes and limited slip differential
Rear: Fabricated non-drive steer with disc brakes
Rotation
Hydraulic driven worm gear and pinion
Slewing brake: Spring-applied hydraulic released brake
Boom rotation: 360° continuous
Slewing speed: 1.6 - 2 rpm
Outriggers
Outriggers: Front and rear, all four corners
Style: Out-and-down, integral holding valve, outrigger pads
Controls: Five (5) 3-position direct hydraulic levers
Outrigger position sensors Fully extended:
Front and rear
Center of pad: 11.3 ft. (3,5 m) 3!
Electrical System
State-of-the-art, weather-resistant components throughout
IP67 rated components
Frame
High strength alloy steel constructed with integral outrigger housings: front and rear lifting, towing, and tiedown lugs.
Carry decks:
Front: 23.2 ft2 (2,2 m) with 6,620 lbs. (3,003 kg) carrying capacity
Side right: 21.8 ft2 (2 m) with 2,200 lbs. (998 kg) carrying capacity
Deck includes adhesive anti-skid treatment.
Hook
Downhaul weight & swivel hook:
110 lbs. (49.9 kg) - use with single part line
Options (Included In Price)
Sheave block: 1-sheave: 145 lbs. (65.7 kg)
In stock in Cleveland, TN and ready to go to work, subject to prior sale.
Call 423-593-2067 for quote.
This crane was posted by:
Renegar-Driggers Machinery Co., Inc.
www.rdcranes.comContact: Bob Renegar, President
Phone: 423-593-2067
Alt Phone: 423-472-2463
Fax: 423-472-2804
Condition
New
0 views this week
0 people have saved
Condition
New
TECHNICAL DESCRIPTIONS & OPTIONS
Operator’s Station
Frame mounted non-vibrating open style operator’s control station
Standard features:
Weather resistant seat
Hour meter
Dash panel includes:
Engine water temperature gauge
Fuel gauge
Tachometer, Check engine light, Engine Stop Light, Outrigger position indicator, wheels centered indicator
Operator aids
Graphic interface for load indicator
Load Moment Indicator (LMI)
Anti-Two Block Device (ATB)
Rated Capacity Limiter (RCL)
Boom
Boom length: 3-section 25.4 ft. (7,7 m) 2-sheave quick reeve boom point
Full power mechanically synchronized
Boom max. tip height: 33 ft. (10,1 m)
Boom angle (min/max): 0° / 69°
Hydraulics
Winch section 29 gpm, Auxiliary section 16 gpm @ 2500 rpm.
Hydraulic oil reservoir capacity: 50 gal. (189 L)
Maximum system operation pressure: 2000 psi
Return line filter with full flow by-pass protection and service indicator
Engine
PSI 3.0L Dual Fuel
Rated power: 70 hp (52.1 kW) @ 2500 rpm
Fuel type: Gas / LP
Fuel tank capacity: 16 gal. (60.6 L)
Tires
H16 Pneumatic 255/70 R22.5
Drive-line
DANA syncromesh 4-speeds forward and 3 reverse with electrical steer model 1102FT12410
Steering
2-wheel, 4-wheel and crab steer with manual alignment
4x2-Front axle drive with planetary hubs and limited slip differential
Front: DANA 212 planetary steer with internal multi-wet-disc brakes and limited slip differential
Rear: Fabricated non-drive steer with disc brakes
Rotation
Hydraulic driven worm gear and pinion
Slewing brake: Spring-applied hydraulic released brake
Boom rotation: 360° continuous
Slewing speed: 1.6 - 2 rpm
Outriggers
Outriggers: Front and rear, all four corners
Style: Out-and-down, integral holding valve, outrigger pads
Controls: Five (5) 3-position direct hydraulic levers
Outrigger position sensors Fully extended:
Front and rear
Center of pad: 11.3 ft. (3,5 m) 3!
Electrical System
State-of-the-art, weather-resistant components throughout
IP67 rated components
Frame
High strength alloy steel constructed with integral outrigger housings: front and rear lifting, towing, and tiedown lugs.
Carry decks:
Front: 23.2 ft2 (2,2 m) with 6,620 lbs. (3,003 kg) carrying capacity
Side right: 21.8 ft2 (2 m) with 2,200 lbs. (998 kg) carrying capacity
Deck includes adhesive anti-skid treatment.
Hook
Downhaul weight & swivel hook:
110 lbs. (49.9 kg) - use with single part line
Options (Included In Price)
Sheave block: 1-sheave: 145 lbs. (65.7 kg)
In stock in Cleveland, TN and ready to go to work, subject to prior sale.
Call 423-593-2067 for quote.
Rental Prices
Please contact the dealer for pricing -- 423-593-2067
Email Seller
0/3000
Was: $87,500
Bob Renegar, 423-593-2067
Renegar-Driggers Machinery Co., Inc. Contact Seller Get FinancingAdvertisements