T560-1 Truck Mounted Telescopic Boom Crane (Sold)

STANDARD FEATURES

Lifting capacity 60 tons (54.4 mt)

Boom

Four-section, full power, mechanically synchronized boom.

High strength, four plate construction welded inside and out with embossed side plate holes to reduce weight and increase strength.

Quick-reeving boom head; no need to remove wedge from socket.

Single boom hoist cylinder provides boom elevation of -4 degrees to 76 degrees for easier reeving changes and close radius operation.

Hoist cylinder is equipped with integral hold valves.

Hoist

533 fpm (163 m/min) maximum line speed, 15,639 lb (7,093 kg) maximum line pull.

Electronic drum indicators.

Integral automatic brakes.

Two speed main hoist with standard lay wire rope.

Grooved drum, tapered flanges, and spring loaded cable roller for improved spooling.

Electronic hoist rotation indicator.

Cab

Rated Capacity Indicator (RCI) system with audible and visual warning and automatic function disconnects.

Anti-two block system with audible and visual warning and automatic function disconnect

Deluxe six-way adjustable operator's seat with torsion bar suspension and adjustable head and arm rests.

Armrest mounted controls for hoists, swing and boom elevation; foot control pedals for swing brake, boom telescope and throttle.

Sound and weather insulated for comfort.

Removable front window, hinged tinted glass skylight, and sliding right-hand window. Tinted safety glass throughout.

Environmentally sealed rocker switches.

Circuit breakers located in cab.

Complete instrumentation.

360-degree house lock standard.

Counterweight

Standard upper counterweight, with auxiliary hoist 10,400 lb (4,717 kg), without auxiliary hoist, 11,500 lb (5,216 kg).

Carrier

Rugged, 8x4 drive, box type chassis construction, with full aluminum decking.

Fuller manual transmission, with 11-speeds forward and three reverse.

Hydraulic assisted power steering.

Full air brakes on all wheels with ABS split circuit system.

Fully independent hydraulic outriggers available for use fully extended to 21-ft (6.4 m), 1/2-extended position, or fully retracted.

5th front outrigger.

Removable aluminum outrigger pads.

Tail swing only 12-ft (3.7 m).

Engine

U.S. & Canada Only - EPA 2010 Road Reg. Compliant Engine -

Cummins ISX, 2010 Road Reg. compliant, 450-HP (336 kW) @ 1,800 rpm, 1550 lb. ft @1200 rpm

6-cylinder, water-cooled, fuel injected diesel with an intercooled, turbo-charger.

Export Only - Outside U.S. & Canada

Detroit Diesel Series-60, (Australian ADR 80/02) (Euro 4), 430-HP (320 kW) @ 2,100 RPM, 6-cylinder, water-cooled, fuel injected

Diesel with an intercooled, turbo-charger.

The engine controls include one electronic vernier adjustable hand throttle and one foot pedal throttle.

Fuel tank capacity - 100 gallon (379 L).

Heavy duty batteries [(3) 12 volt, 950 cca].

Hydraulic System

High capacity, full flow oil filtration system with a 117 gallon (443 L) capacity reservoir.

Three gear pumps driven off the transmission.

Combined system capacity is 115 gpm (435 lpm).

Cab

One-man aluminum cab mounted on vibration absorbing pads.

Optimum visibility with safety glass, acoustical foam padding inside cab for insulation against sound and weather.

Hot air defroster.

Six-way adjustable air suspension seat with seat belt and arm rests.

Lockable door with roll down window.

Manuals

1-set of operators and parts manuals will be shipped with the machine.

INCLUDED ITEMS

Jib offset 22’ – 57’

Auxiliary hoist

Standard rope on both hoists

Single lever dual axis controls

Hydraulic AC and LP heater in upper

AC in lower

7-ton overhaul ball

60-ton 5-sheave hook block

Remote outrigger controls

Immersion heater for hydraulic reservoir

2 yellow strobe lights

Work light package – contains 3 lights

360-degree spotlight

3^rd wrap kit – aux hoist