1988 Link-Belt HTC835, 35 Ton, Hydraulic Truck Crane; CranesList ID: 517,
- 32' - 80' three-section boom with two power sections,
- 29’ Swing-away Jib with 2° offset,
- Main and *Auxiliary Winches with 5/8" wire rope,
- Load Moment Indicator with Anti-Two Block,
- Hook Block,
- 8’ Wide Link-Belt Carrier With 6 x 4 Drive,
- Cummins Diesel Engine - AS PER LINK-BELT SPECIFICATIONS & SUBJECT TO FINAL CONFIRMATION,,
- Fuller Roadranger RT-6613; 13 speeds forward, 3 reverse Transmission - AS PER LINK-BELT SPECIFICATIONS & SUBJECT TO FINAL CONFIRMATION,
- Front Tires: 16.5 x 22.5 (16 PR) transport type tubeless,
- Rear Tires: 10.0 x 20.0 (12 PR) transport type with tube,
- Power hydraulic, double box, single beam outriggers, front and rear. Vertical jack cylinders, each equipped with integral holding valve. Beams extend to 18' centerline-to-centerline and retract to within 8' overall width. Equipped with stowable 19" square lightweight floats. Controls and sight level bubble located in upperstructure cab,
- 5th Front Outrigger,
- Already fully imported into Mexico!
http://www.CranesList.com,
LOCATED IN MEXICO!
