Palfinger PK11.001 SLD 3 Hydraulic Loader equipped as follows:

- Mounted behind cab

- Maximum lifting moment 74,780 ft/lbs

- 2-section hydraulic boom extension to 25’6”

- Manually extendable outriggers with a spread of 16’0”

- Paltronic Overload Protection System

- Single linkage at outer boom

- Rotation angle 400 degrees

- 4-function Danfoss control valve

- Dual operator control stations

- Bubble level at both outrigger control stations

- Load holding valves on main, outer and extension cylinders

- Return oil utilization

- Oil tank 17.2 US gallons mounted at crane base with return filter

- Two composite outrigger pads with storage brackets

- 180 degree stable over rear

12’ Alum-line body equipped as follows:

- 12’ flatbed

- 3” extruded aluminum I-beam crossmembers on 12” centers

- Extruded aluminum perimeter bed rail – ½” thing

- Upgraded to 1-1/4” extruded floor

- In-frame storage box 10’ between frame truck rails with rear doors

- 3” x 3/8” rub rail and 2/4 stake pockets

- 6” deep rear diamond plate step bumper

- 20” deep side skirt, 0.125” diamond plate material

- Underbody alum. Diamond plate toolboxes: 60”L x 20”H x 24”D – 1 each side

2019 International 4300 SBA 4x2 chassis equipped as follows:

- 25,500 GVW

- Cummins B6.7 engine – 250 hp @ 2400 rpm, 660 lb-ft at 1600 rpm

- Engine block heater

- Allison automatic transmission

- Hydraulic brakes

- 50 gallon fuel tank

- Gear ratio 3.36

- Rear suspension – single spring 18,500# with 4500# aux rubber spring

- Driver’s seat – air suspension, high back, vinyl

- Passenger’s seat – non suspension, high back, vinyl

- Steel wheels – 19.5x6.75

- Tires – 245/70R19.5