NEW Elliott G85R Standard features: Our new Elliott HiReach G85R, having an 85’ working height. Basic unit includes base assembly supporting rear mounted rotating turret, hydraulic powered continuous rotation mechanism, oil reservoir mounted to truck frame, oil reservoir mounted to truck frame, oil and manual hydraulic controls mounted to turret. Electronic proportional three stick remote controls on platform. Base mounted “MH" type hydraulically powered, individually controlled rear main outriggers and “A” secondary outriggers behind cab. High strength steel four section hydraulically telescoping boom with one double acting 7” lift cylinder plus (1) 2 ½” piggyback and (1) 3” extension cylinder. Two exposed cable carriers to boom tip. Electronic self-levelling and rotating 40” x 60” EZR work platform with remote levelling from platform and aluminum floor. Power take off and pump drive, pressure gauge, pump and holding valves on all cylinders. Remote start/stop at upper and lower controls, 12-volt emergency pump with switch at upper and lower controls. PTO hour meter, backup alarm, fire extinguisher, safety triangle kit, and tow body harness and lanyards. LED lights to include all bed marker lights, stop, tail and turn. Installed on chassis, tested and ready to operate. Unit certified to ANSI A92.2 for Vehicle-Mounted Elevating and Rotating Aerial Devices. Platform capacity 500 lbs. Additional Options: • 16’ steel bed with LED lights and Grip Deck Coating • Stand ICC Rear Bumper with Steps and Grab Handles • Tie Down Rails on Both Sides of Bed • Automatic Safety Rotation Lockout – Prevents Boom from Rotating to Side where MH Outriggers are not fully extended Horizontally (“A” Outriggers Remain Fully Extended) • 5,900 lb. Planetary Winch with Anti-Two-Block Switch, Horn, Two Part Hook & 180’ 3/8” Cable & Retainer Lug • 500 lb. Platform Mounted Jib with hydraulic Winch, Jib Stows in platform • 110 Volt Line to Platform • (2) Sign Forks on Platform • Hot Shift PTO for Automatic Transmission • 98” x 36” x 24” Steel Crossbody Box (Requires 2” shorter bed) • Steel Cable Carrier Cover • Cab Guard from Back of Cab to Front Bumper • Mounting Bracket above 8’ Crossbody Box for Customer Installed Welder/Generator (designed for Miller Bobcat 225) • Remote Start/Kill Switch in Platform for Customer Installed Welder/Generator • Welder Leads to Platform – (2) 1 Gauge Cables • HiReach Unit Painted Red, Subframe Painted Black, Outriggers Painted Red MOUNTED ON 2018 Freightliner M2 2018 Freightliner M@ 106, 260 hp Cummins B6.7 diesel engine, 222” WB, 156” CA, 90”AF Allison 3500 RDS automatic transmission, 33,000 GVWR, 13,000 lb. front axle, 20,000 lb. rear axle, 11R22.5 front an drear tires, air brakes, 50 gallon aluminum fuel tank, AM/FM radio, cruise control, air conditioning, air ride driver seat, two-man pass. bench seat. Color white.