Stellar TMAX1-13 Aluminum Mechanic Body equipped as follows:

-          Aluminum doors and side packs

-          Torsion box understructure with isolated, steel crane compartment

-          Master-Lock system

-          157” long

-          Six (6) recessed cargo tie-downs

-          Two (2) rear mounted grab handles

-          12” fold down tailgate – painted black

-          21” work bench bumper with thru compartment

-          Rubber fenderettes

-          All compartments raised to 52” H

-          Overlapped doors on SS1V/CS1V and horizontal compartments

-          2- & 3-point stainless steel compression latches

-          Stainless steel “Billet Style” hinges

-          Spring loaded door stops

-          Dual-seal automotive type compartment weather seal

-          SS1VF – Heavy duty aluminum drawer set – 35.5”H x 34”W x 18”D, 3-3”, 3-5”, 1-7”

-          SS1VR – Shelf with (3) dividers

-          SS Horizontal – Heavy duty aluminum drawer set – 3-3”

-          SS Rear – Shelf with (3) dividers

-          CS1V – 2 bottle oxy-acet holder

-          CS2V – Shelf with (3) dividers

-          CS3V – Shelf with (3) dividers

-          CS Horizontal – Shelf with 3 dividers

-          CS Rear – ½” x 50’ hose reel with roller guide – exits rear of body

-          Stellar 40P hydraulic driven air compressor – produces 40 CFM at 100 psi, 2-cylinder, single stage compressor, direct drive coupling, oil cooler, fan, and hydraulic motor

-          25-gallon air tank kit (1 10-gallon, 1 15-gallon)

-          FLR system – (filter, lubricator, regulator)

-          Backup alarm

-          ICC safety kit – 2.5# fire extinguisher and reflector kit

-          Weld-on receiver hitch

-          Spray-on bed liner for load bed walls and floors, and workbench

-          Undercoated

-          Prime painted white

Stellar 8630 telescopic crane equipped as follows:

-          53,100 ft/lb rated when in boost mode

-          8,600# maximum capacity at 6’2” radius

-          29’8” maximum hydraulic reach

-          Boom elevation: -10° to +80°

-          400° non-continuous rotation – durable enclosed rotation system with a cast iron base and an internal mechanical stop

-          Planetary winch with 120’ of 3/8” wire rope

-          Max line pull speed 60ft/min

-          Quick release snatch block stow

-          CDTpro Control System. The most advanced crane remote ever. Save time by knowing your crane can lift the load before you set up. The innovative, industry-only Range Finder technology provides real-time max lifting capacity from any point around the crane

-          On-Demand speed control ramps engine RPM up only when the crane is being used. When crane is not used for 5 seconds engine RPM returns to idle. This lowers fuel consumption and reduces noise pollution in the work area

-          Greasable pivot bushings, each pivot pin location includes bushings and grease zerks to provide for years of use

-          Hydraulic stabilizers

MOUNTED ON:

Ford F600 equipped as follows:

-          6.7L diesel engine

-          10-speed automatic transmission

-          Cruise control

-          Air conditioning

-          Power group

-          40/20/40 split vinyl bench seat

-          Backup camera

STOCK PHOTOS