Features

The AT40M – JEMS comes standard with a single-operator, 400 pound capacity platform with an 800 pound capacity material handling jib. This unit has a 45-foot working height and 30-foot side reach with a 180 degree platform rotator. Try it with the new composite ISO-Boom option to allow the unit’s second stage to be fully retracted while maintaining dielectric integrity and meeting OSHA guidelines for minimum approach distances.
Specs:
- Ground to Bottom of Platform*: 40 ft (12.2 m)
- Maximum Side Reach: 30.8 ft (9.4 m)
- Boom Articulation (Lower Boom): -25 to 75°
- Rotation: Continuous
Standard Features:
- Altec Arm Jib
- Fiberglass Upper Boom and Lower Boom Insulator
- Insulating, ANSI Category C, 46KV and Below
- Compensated Articulating Arm
- Continuous Rotation
- Hydraulic Boom Extension
- Hydraulic Platform Rotation and Tilt
- Full Pressure, Open Center Hydraulic System
- Outrigger Motion Alarm and Outrigger Interlocks
- Platform Access From Ground
- Emergency Stop Valves at All Upper and Lower Control Stations
- Platform 24 x 30 x 42 in Nominal
- Tool Circuit at Platform
- Extension Dependent Load Chart
- Jib Capacity Up To 800 lbs (362.9 kg)