Skip to content






Condition

New

cw-large-alt-tagline-only-logo.png

Sales Dept., 1-866-458-5915

CraneWorks, Inc. Contact Seller Get Financing

Features

Versalift VN-555-MHI Non-Overcenter Bucket Truck
- Powerful Non-Overcenter Material Handler
- Truguard® Safety System Standard
- Simple Mechanical Linkage for Boom Compensation
INDUSTRIES SERVED: Electric Power Distribution, Electric Utilities
TYPE: Non-Overcenter
HEIGHT RANGE: 45ft - 65ft
MODEL SERIES: VN
Product Overview
- Working Height: 60.5 ft (18.4 m)
- Height to Bottom of Platform: 55.5 ft (16.9 m)
- Horizontal Reach: 42.8 ft (13 m)
- Stowed Travel Height: 12.3 ft (3.74 m)
- Platform Capacity: 700 lbs (318 kg)
- Platform Rotation: 90
- Insulated or Non-insulated: Insulated
- Material Handling: Yes
SPECIFICATIONS
HYDRAULIC SYSTEM
Hydraulic Controls: Full Hydraulic
Operating Pressure: 3000 psi (210 kg/cm²)
Flow Rate: 12 gpm (45 lpm)
Filtration: 10 micron return | 100 mesh suction
System Type: Open Center
Power Source: PTO Pump
BOOM
Upper Boom Articulation: 192
Lower Boom Articulation: 120
Upper Boom Insulation Gap: 108 in (2.74 m)
Lower Boom Insulation Gap: 18 in (0.46 m)
Lower Boom Lift Eye Capacity: 2500 lbs (1133.98 kg)
Boom Rotation: Continuous
VEHICLE REQUIREMENTS
GVWR: 33,000 lbs (12700.52 kg)
Cab to Axle (minimum): 108 in (2.59 m)
MATERIAL HANDLING OPTIONS
Jib & Winch Capacity: 2000 lbs (907.18 kg)

Included Options

•Furnish and install mounting hardware, PTO, and pump
• Install VERSALIFT VN-555-MHI
• Furnish and install hydraulic diagnostic test ports
• Furnish and install body and accessories
• Furnish and install slope indicators
• Furnish and install park brake interlock
• Furnish and install backup alarm
• Furnish and install a 4-corner LED amber strobe system
• Furnish and install ICC rear bumper
• Furnish and install a pintle plate with D-ring each side
• Furnish and install combo pintle/hitch with 2 5/16” ball
• Furnish and install a 7 prong trailer receptacle
• Furnish and install mud flaps
• Furnish and install travel height decal in the cab
• Furnish and install a compartment top access step
• Furnish and install a two-step platform access step
• Furnish and install rubber bumper for hotstick door
• Paint body to match chassis
• Paint treadplate floor and compartment tops with black no-skid
• Furnish four (4) 24” X 24” X 2” outrigger pads
• Furnish two (2) rubber wheel chocks
• Furnish fire extinguisher and 3-piece triangle reflector kit
• Test ride completed unit for 1 hour
• Test and Certify per ANSI A92.2

  • Year: 2024
  • Condition: New
  • Unit #: BM-4234
  • Serial #: WX230212
  • Location: Houston Texas USA
YOUR MONTHLY PAYMENT

Calculator is for Estimation Purposes Only

Get pre-qualified

Rental Prices

Please contact the dealer for pricing -- 1-866-458-5915

Email Seller

Email Seller
cw-large-alt-tagline-only-logo.png

Sales Dept., 1-866-458-5915

CraneWorks, Inc. Contact Seller Get Financing

Advertisements