2018 Demag AC160-5 (Used)

3,725 Upper Hours

5,907 Lower Hours

51,750KM

Engine: Euromot 4/ Tier 4F: Scania DC13; Diesel Engine 500HP

Fuel Tank: 480l Diesel (no RME/ Bio-Diesel); 60l Tank for Ad blue

Transmission: AS12INT, ZF AS-Tronic; Automated gearbox, 12 forward speeds and 2 reverse

Axles: 10X6X10; 5 Axles, axles 2,4,5 are driven and equipped with disengage able axle-differential lock; Axles 4 with a disengage able center-differential lock;  All axles are steered

Suspension: Hydro pneumatic suspension with axle load compensation; hydraulically lockable; Manual or automatic leveling alternatively

Brakes: Pneumatic dual circuit service brake, acting on all wheels; Disc brakes; Hydraulic retarder integrated into transmission as wear less, sustained-action brake; Additional exhaust brake; Parking brake according to norms

Wheels: Wheels 385/95R25 (14.00R25); Steel rim 9,5-25/1,7"; TechKing ETCRANE 170F or similar

Cab Carrier 2500: S-PACE type 2,50m; Adjustable driver seat, armrests and pneumatic suspension; Co-driver's seat; Steering wheel height and tilt adjustable; Power windows; Tinted glass; Power mirrors with heater; Radio-preparation

Heating Carrier: Engine-dependent warm water heating with 12kW heating power

Driving Lights: Including low beams, high beams, daytime running lights

Outriggers: H-4-Point design; Vertical and horizontal movement fully hydraulic; Manual leveling; 3 outrigger bases of 2,52m, 5.3m and 7.5m

Outrigger Pads: 4 round outrigger pads A=0,38m² Polyamide, with transport position at vertical cylinder

Outrigger Basis Monitoring: Surveillance of each outrigger beam for detection of horizontal stroke; Warning in case of anomaly in Superstructure cab (Attention: There is no automatic linkage with the LMI-system)

Outrigger Load Indicator: The outrigger load is indicated in the operator cab and the outrigger control box

Automatic Outrigger Leveling: Automatic Outrigger leveling; Note: Outrigger load indicator is required

Fire Extinguisher: With holder in carrier cabin

Telescopic Boom HA68: 12,4m -68m; Single cylinder telescoping system, automatic telescoping; Attachments for all equipment and extensions; 4 sheaves integrated in boom head for max. capacity of 76,6t

Counterweight: Counterweight 32,6t, 6 pieces (a-f); Expandable to max. 46t

Operator Aids: IC-1, with integrated load moment indicator acc. EN13000; Color display; Displaying of current operating conditions, load charts, fault indicator; Signal lights indicating LMI-load; Crane data logger

Lattice Jib

Swing Away Rooster Sheave

32-1-21-E 32 Ton Hook Block

125-5-21-D Hook Block with ramshorn hook

80-3-21-E Hook Block

Hook 12-0V-E Ball

Auxiliary Winch

Rear View Camera

Central Lubrication Carrier

Radio CD Carrier

Axle Load Display

ABS with hill-start aid holder function

Toolkit