In-Progress - Expected completion late Oct. 2021

Ferrari 7153CR.A4 NOCE crane complete w/ the following:

·         Maximum lifting capacity of 6,100 lbs. at 15‘7”

·         Maximum lifting capacity of 4,050 lbs. at 22’

·         Maximum lifting capacity of 2,980 lbs. at 28’5”

·         Maximum lifting capacity of 2,310 lbs. at 35’1”

·         Maximum lifting capacity of 1,920 lbs. at 41’10” (end of Hyd. Extensions)

·         Approx. 4,500 lbs. dry weight

·         Slewing Angle: 425 Degrees (Best in Class!)

·         (4) Hydraulic Extensions (Max Reach 41’10”)

·         Extra-Wide Hydraulic Out & Down Stabilizers (Max Width 17.72’)

·         Oil Tank Capacity 130 L

·         Rotating Hook, Capacity: 8,0 t

·         Hetronic Factory Installed Radio Remote Controls

·         Control Valve DANFOSS PVG32

·         High Pressure Oil Filter

·         Manual Controls on One Side of Crane

·         Hydraulic Load Limiting Device (NO CE)

·         Centralized Greasing System

·         Ergonomic Ground Control Station

·         Magic Touch – folding / unfolding assistance.

·         Red Power, Link on Column = Constant Lifting Capacities (on all main boom positions)

·         Link on Second Boom = Negative Boom Angle (giving access to low ceiling space areas)

·         Load Holding Valves (on all hydraulic cylinders)

·         Unit painted Ferrari Red.

·         4-Bolt Mounting Kit

 2022 Freightliner M2 106 chassis complete w/ the following:

·         Engine Cummins L9 330HP @2200 1000lb/ft@1200rpm

·         Jacobs C-Brake w/ on/off Switch

·         160 Amp Alternator

·         Allison 3500 RDS-P 6-Speed Automatic Transmission

·         Power Steering TAS-85

·         RH Step SCR/DPF w/ B-Pillar Cab Mount Vertical Tailpipe

·         Detroit DA-F-16.0-5 16,000lb Capacity Front Axle

·         Taper Leaf Springs, Shocks 16,000 lb.

·         Meritor RS-23-160 23,000lb. Capacity Rear Axle

·         Diff Lock Drive Axle

·         Airliner 23,000 lb. Rear Suspension

·         5.38 Rear Axle Ratio

·         Air Brake Package

·         7/16x3 - 9/16”x 11 1/8 Steel Rails

·         Air Connections to EOF w/ Glad Hands & Tailer Plug

·         Michelin XZY-3 385/65R22.5 18 Ply Front Tires

·         Alcoa 22.5”x12.25” Aluminum Front Wheels

·         Michelin XDS2 11R22.5 16 Ply Rear Tires

·         Alcoa 22.5”x/8.25” Aluminum Rear Wheels

·         Two Aluminum 50 Gal Fuel Tanks

·         3-Piece 14” Chromed Steel Front Bumper w/ Tow Hooks

·         106” BBC Flat Roof Aluminum Conventional Cab

·         Grey Interior

·         Driver Seat - High Back, Air Ride, Vinyl with Cloth Insert

·         Passenger Seat(s) – 2 Man Toolbox, Mid Back, Non-Suspension Seat

·         1-Piece tinted Windshield

·         Dual West Coast Bright Finish  Heated Mirrors w/ 8” Convex Mirrors Mounted Underneath

·         Power Door Locks & Power Window Lifts

·         Heater/Defroster & Air Conditioner

·         Stereo w/ AM/FM/WB w/ SiriusXM, Bluetooth, IPOD Interface, USB & AUX INPUTS

·         Dual Amber Strobe Lights w/ Stainless Steel Brackets

·         Exterior Color White

NWCE Custom 20’ long deck complete w/ the following:

·         Deck dimensions approx. 20’ long x 8’ wide

·         Perimeter of deck to be 3”x 5” angle iron

·         Cross sills made of 3” C channel, 16” on center

·         Top of decking to be 2x8” treated wood planks screwed to cross sills.

·         Front headache rack made with steel tubing, Approx. 30” high x 96” wide c/w chain hangers, broom/shovel holders, chain tray, grab handles with (2) LED work lights.

·         Full length stake pockets & rub rails.

·         Rear apron w/ (2) D-rings, 3”(2.5” opening) receiver hitch plus air glad hands & electrical outlet. 

·         Two Aluminum 24”x24”x24” cabinet mounted on driver’s side, under the deck

·         Cold rolled access ladders at the front of the deck, 1 per side

·         Post style chain hangers (Tire chains not included)

·         Outrigger pad holders complete w/ a set of composite pads, mounted 1 per side.

·         Mud flaps front and rear of tires with anti-sail brackets

·         All steel rigging is sandblasted, primed, and finish with Enamel paint black

·         All LED Lighting and conspicuity tape meeting Canadian Motor Vehicle Safety Standards

·         National Safety Mark Decal