2007 Oceaneering D-0071625 Gantry Crane
SOLD
Patrick Noll: 832-270-9997
Last Updated: 19 Dec 2019
Capacity: 44.00
Boom/Jib: 10
Condition: Excellent
2007 Oceaneering D-0071625, Gantry Frame and Mudmat
Oceaneering pipeline repair gantry crane. The gantry can be used for other lifting tasks.
The Oceaneering gantry frame was developed for lifting a spool piece during pipeline repair tasks. Specifically, the gantry is intended to provide a vertical lift at the center or predetermined point on a horizontal jumper spool piece during installation.
The system consists of a gantry frame and a mud mat. The mud mat is placed into position prior to the jumper or spool piece being installed. The gantry consists of a support frame trolley that travel s a hydraulic winch over a 10’ x ’10 X-Y area centered in the frame center. The gantry legs land on the mud mat in 4 “pie pan” receptacles.
Both the gantry frame and mud mats are designed as bolt together modules that can be broken down and shipped on standard flat bed trucks without permit loads.
Gearmatic GH-50 marine hydralulic winch that has been modified to prepare it for subsea use. winch is rated to maximum line pull of 44,000 lb but is de-rated for use with the gantry to match the system rating of 32,000 (lb)
This winch alone cost over $40,000!!!!
Call for Pricing and more details.
T&R Pipeline Services, Inc.
www.trpipe.comContact: Patrick Noll, Contracts & EHS
Phone: 832-270-9997
Alt Phone: 832-270-9997
Fax: 713-413-9112
THIS LISTING SOLD, LAST LISTED AT $125,000
Condition
Excellent
0 views this week
0 people have saved
Condition
Excellent
2007 Oceaneering D-0071625, Gantry Frame and Mudmat
Oceaneering pipeline repair gantry crane. The gantry can be used for other lifting tasks.
The Oceaneering gantry frame was developed for lifting a spool piece during pipeline repair tasks. Specifically, the gantry is intended to provide a vertical lift at the center or predetermined point on a horizontal jumper spool piece during installation.
The system consists of a gantry frame and a mud mat. The mud mat is placed into position prior to the jumper or spool piece being installed. The gantry consists of a support frame trolley that travel s a hydraulic winch over a 10’ x ’10 X-Y area centered in the frame center. The gantry legs land on the mud mat in 4 “pie pan” receptacles.
Both the gantry frame and mud mats are designed as bolt together modules that can be broken down and shipped on standard flat bed trucks without permit loads.
Gearmatic GH-50 marine hydralulic winch that has been modified to prepare it for subsea use. winch is rated to maximum line pull of 44,000 lb but is de-rated for use with the gantry to match the system rating of 32,000 (lb)
This winch alone cost over $40,000!!!!
Call for Pricing and more details.
Rental Prices
Please contact the dealer for pricing -- 832-270-9997
Email Seller
Advertisements