BOOM DETAILS
New – BIK Tree-Care Series TC-70 (PM 23.5 ton/m)
- 6-hydraulic extensions & one manual grapple extn
- Vertical Reach of 70’
- Handles 3,800 lbs @ 70’ Vertical
- HORIZONTAL Capacities:
- 9,800 lb @ 14’
- 5,900 lb @ 20’
- 4,330 lb @ 26’
- 2,560 lb @ 40’
- 1,750 lb @ 55’
- 408 Degrees Rotation on Main Hydraulic Slewing
- Double pilot operated on slewing and pilot operated check valves on all cylinders, Hydraulic Oil Cooler, high pressure return filter and min. 40-gallon oil tank for boom
- DANFOSS Proportional Valve Controls – single sided operator control station
- Load Holding Valves on all cylinders
- PM Power–Tronics electronic monitoring & load control with Stabilizer deployments sensors & didgital read-out on the remote
- SCANRECO Radio Remote Control
- Hydraulic OUT and Hydraulic DOWN Extra Wide – 21’ 6” span , 2-sided stabilizers w/ round foot pads welded to bottom of cylinder.
- 15 degree negative angle on folding arm – Hydraulic Overload Protection – simplified system that prevents boom from overload
- Two functions plumbed to end of 6th extn, – Heavy Duty Pedestal Turning Cylinders for greater turning torque & reduced wear
- Installed at rear on integral sub base / torque box, Engineer certified stability inspection & certificate,
Warranty: 1-Yr. parts & labour on entire boom, 3-Yr. on Structural Components
DECK DETAILS
New – 14’ long Steel Flat Deck:
- 4’ head board
- 8’ wide usable deck stake pockets with rub rail
- Steel checker plate Deck surface
- 5-sliding tie down winch straps on pass side
- Dual access ladders at front& winch bar with holder
- Integral sub-base / torque box To maximize torsion strength
- DOT stickers and clearance lights as required.
TRUCK DETAILS
New – Freightliner M2-106 2- axle Truck – NON-CDL with 33,000 max GVWR
- 300 hp Cummins Diesel
- Allison Auto Trans
- 12,000 lb fronts w/315 type 22.5 tires
- 21,000 lb rears, polished aluminum rims
- Air Cond, 2-man pass seat, cruise, power windows/locks, tilt/tele steering, stereo, chrome bumper/grille, white color cab, etc…
Also Included:
- (2) pcs – 2” PVC stabilizer pads – with holders
- 36” Alum storage boxes installed
- Mecanil SG-220 Grapple saw with spare parts kit
- Grapple saw holder/stowe bracket on side of frame near boom
- BIK tech to familiarize boom operation at your facility for 2-3 days
Other Options at Extra Cost:
- (1) Aluminum self evelling man basket
- Drawplate with reese type pintle hook receiver with electric trailer brake actuator installed
- (6) pcs removable log bunks to fit deck pockets
- TC-78 version – with 8’ extra reach and comes with SG-160 Grapple saw, Handling 2,800 lbs @ 78’ Vertical Reach
- Condition: New
- Location: Milford Massachusetts USA
Rental Prices
Please contact the dealer for pricing -- 888-557-2244
