Features

Product Overview
Working Height: 45 ft (13.72 m)
Height to Bottom of Platform: 40 ft (12.19 m)
Horizontal Reach: 27.75 ft (8.23 m)
Stowed Travel Height: 10.33 ft (3.05 m)
Platform Capacity: 450 lbs (204.12 kg)
Insulated or Non-insulated: Insulated
Material Handling: No

Included Options

Steel Service Body:
132" Service Body 40 inches high X 94 inches wide.
Body Dimensions:
• 20 Inch compartment depth.
• 54 Inch bed area.
• 24 Inch top of floor to top of body.
• 18 Inch horizontal compartment height.
Body Materials:
• 12 Ga Wheel Wells Covers.
• 16 Ga. Galvanneal body materials.
• 12 Ga. Hot rolled treadplate floor.
• 12 Ga. Hot rolled treadplate compartment tops.
Door Details:
• Stainless Steel Automotive rotary type door latches
• Latch Covers on All doors.
• Stainless steel rod and socket type door hinges.
• Chain stops on all doors.
• Spring Retainers on Horizontal Doors
• Double Panel Body Doors.
Body Features:
• Rubber rolled crown type fenders.
• Master door lock system.
• Automotive Bulb Type Weatherstripping.
• Front bulk head - Bolt on
• Shelving / Hooks installed on DUAL Uni-Strut for infinite adjustment.
• Two (2) formed angle Mudflap brackets Streetside Compartmentation:
1st Vertical:
• 30 Inches wide with Two (2) shelves each with adjustable dividers on 4" centers.
2nd Vertical:
• 24 Inches wide with Two (2) shelves each with adjustable dividers on 4" centers.
Horizontal:
• 54 Inch open compartment.
Rear Vertical:
• 24 Inches wide with Two (2) shelves each with adjustable dividers on 4" centers.
Hotstick Shelf:
• 132 Inches long with rear dropdown access door.
Curbside Compartmentation:
1st Vertical:
• 30 Inches wide with Two (2) shelves each with adjustable dividers on 4" centers.
2nd Vertical:
• 24 Inch wide gripstrut access steps to bed area.
Horizontal:
• 54 Inch open compartment.
Rear Vertical:
• 24 Inches wide with Five (5) fixed material hooks 1-3-1.
Tailshelf:
• Treadplate tailshelf 30 inches long X Full width of body x 6 inches high
• 7-Lamp light bar installed at rear.
Rear Lighting L.E.D in Tailshelf:
• Rubber mounted recessed rear lighting kit with harness
• Two (2) stop/tail/turn lights -Peterson Brand M826R-7 L.E.D.
• Two (2) clear back up lights -Peterson Brand M826C-7 LED
• Two (2) front clearance lights reflector style-Peterson brand M173A L.E.D
• Two (2) side clearance lights reflector style-Peterson brand M173R L.E.D
• Two (2) rear clearance lights reflector style -Peterson brand M173R L.E.D
• Three (3) light center cluster reflector Style -Peterson brand M173R L.E.D
• 7-Lamp light wiring harness. Belted Step:
• One (1) Rubber Belted type step at side access.
• One (1) Rubber Belted type step at rear of tailshelf -Curbside.
Grab Handles:
• Two (2) Bolt-On Type at side access of body.
• Two (2) Pool type grab handles top of tailshelf.
Paint:
• Prime Paint Gray Interior
• Rubberized protective undercoating.
•Installation Details
• Furnish and install mounting hardware, PTO, and pump
• Install VERSALIFT SST-40-EIH
• Furnish and install hydraulic diagnostic test ports
• Furnish and install body and accessories
• Furnish and install park brake interlock
• Furnish and install slope indicators
• Furnish and install backup alarm
• Furnish and install an LED amber beacon streetside behind the cab
• Furnish and install an ICC bumper
• Furnish and install a pintle plate with D-ring each side
• Furnish and install a combination pintle hook with 2-5/16” ball
• Furnish and install a 7 prong trailer receptacle
• Furnish and install mud flaps
• Furnish and install travel height decal in the cab
• Furnish and install a set of rear underframe torsion bars
• Furnish and install a rubber bumper for the drop down hotstick door
• Paint body to match cab and chassis
• Paint treadplate floor and compartment tops with black no-skid
• Furnish a 5lb fire extinguisher and a 3-piece triangle reflector kit
• Test ride completed unit for 1 hour
• Test and Certify per ANSI A92.2