Texas Used Crane Sales at 281-623-3411 - 1990 Grove RT58D for sale
1990 Grove RT58D SN 72702, Cummins remanufactured engine installed in 2005, 60' main, 20' jib, block and ball, working Trimble anti two block safety system, Current OSHA, work ready.

Texas Used Crane Sales at 281-623-3411
Manitowoc Encore - Crane Care RT 58B Model Re-Manufacture Manitowoc CraneCARE scope of work for the remanufacturing of RT 58B serial number 49409. Our Encore Certified Crane Check program was created to assist in laying down the parameters for a complete machine remanufacture and thorough inspection using OEM replacement parts and utilizing a factory owned and operated facility manned by specially qualified technicians. The scope of the program is to restore the unit as close to original specifications as possible. The machine will be completely disassembled, some components will be remanufactured, and many will be replaced with new parts. By major components: Engine was rebuilt by OEM (Detroit) back to factory specs. 2. All hydraulic hoses, tubing, gaskets, were replaced. 3. Hydraulic control valves, electric solenoids valves, flow dividers, holding valves and pilot operated check valves: were replaced/rebuilt with new components. 4. Hydraulic Cylinders: Steering, axle lock-out, outrigger extension, boom lift, boom telescopic, were remanufactured and pressure tested. 5. Hydraulic swivel was remanufactured, and pressure tested. The electric swivel was replaced. 6. Hydraulic and Fuel tanks were drained, removed, and thoroughly cleaned. New filters were provided including fuel and hydraulic and fuel-water separator. New fuel lines were installed. 7. All electric wiring harnesses were all replaced. 8. The batteries were replaced, and the alternator was remanufactured. 9. Lights and indicators: including headlights, back-ups, turn signals etc. were replaced. 10. Engine radiator was cleaned and inspected by local radiator shop. 11. All hydraulic pumps (steer, 3 stage, charge) were replaced. 12. Swing bearing, bolts, and all mounting hardware were replaced. 13. Model 15 main hoist was remanufactured. The wire rope, wedge, brakes, gear reduction units, cable follower bearings, sprag clutch, seals, etc. were replaced. A load test was performed. 14. Telescopic hydraulic boom assembly: The entire boom was removed and disassembled. Each section was inspected using our procedures to check for camber, twist, squareness, convex, concave or any structural defects. All hardware, sheaves, rope retainer pins, bearings, spacers, wear pads, extension and retraction cables inside the boom was replaced. 15. The four tires were replaced. Wheels were blasted and painted. 16. Drivelines and universal joints were replaced/rebuilt with new hardware. 17. New brake master cylinder, booster, brake lines and wheel cylinders were replaced. 18. The entire exhaust system was replaced. The air filter, canister and intake flex lines were replaced. 19. Remanufacturing of the cab will include the following: • Replacement of all cab weather-stripping, cab acoustic, and floor mat. • Replacement operators’ door latch, locks, and handles. • Replacement of all cab glass and rubber seal. • Replacement of all gauges, indicator lights, panels or control labels and switches. • Replacement of operators’ seat to include retractable seat belt. • Replacement of steering wheel, steering column including horn switch. • Replacement of side mounted mirrors, cab fan, dome light, wiper system, and accelerator pedal. 20. Swing gearbox was removed and remanufactured. The swing brake, motor, and the pinion gear were replaced. 21. The four outrigger beams were removed, blasted, and painted. A new outrigger control valve was installed. 22. Hook block and headache ball structure and sheaves were inspected and replaced as needed. All sheave bearings were replaced. 23. LMI - Wika QScale LMI (Load Moment Indicator) system retrofit with currently available technology will be provided. This system shall provide comparable performance to existing new crane systems. 24. Clean and paint the entire machine and install new decals in accordance with Manitowoc Crane Group manufacturing and design requirements. 25. We will provide limited warranty for a one (1) year timeframe for all work completed. The start of the warranty shall be the in-service day of the crane.

CranesList at 562-743-2338
2007 Terex-Koehring, 7.5 Ton, Rough Terrain Crane; CranesList ID: 523, 21.75' - 35.75' Two Section Full Power Boom , Boom length markers are located on both sides of the inner boom, No Jib , Main Winch with 1/2" Wire Rope, Boom Angle Indicator, Drum Rotation Indicator, Anti-Two Block, One Sheave Hook Block, 2,200# Counterweights, 360 degree rotation on outriggers, 8 ' wide Terex All Wheel Drive with All Wheel Steer (CRAB), Carrier, Cummins Diesel Engine, 4 speed forward and reverse transmission with torque converter - SUBJECT TO FINAL CONFIRMATION, Front and Rear Tires: 12:00 x 22.5 14 PR, Heater, Outrigger Spread 12.42' Site level bubble is next to the operator's seat to insure vehicle is level, Tool Compartment, Videos available by request. http://www.CranesList.com, LOCATED IN NEVADA!

Texas Used Crane Sales at 281-623-3411 - 1998 Terex CD225
72' + 43' jib, block & ball, Cummins, 7,000 hrs

Walter Payton Power Equipment, LLC at 708-656-7700 - 2008 Terex CD225 Cab Down Crane
· 30’ - 72’ Three Section Boom · Cummins 4BTA 5.9 Diesel Engine · Four Wheel Drive · Four Wheel Steering · Six Forward, Six Reverse Speeds · 20.5 X 25 Deep Lug Tires · RCI 510 Rated Capacity Indicator with Automatic Function Disconnects · Flipper Style Hydraulic Outriggers · Enclosed Cab with Heat/ Air Conditioning · Hook Block and Ball

Alain Cadieux, Ltd. at 514-386-6469
20 Tons Capacity, GM-453 engine, 63' boom, 4WD Drive, Good Condition. Located Montreal Qc Canada

Nelson Intermountain Crane, Inc. at 801-399-3385 - 1974 Grove RT-58
1974 Grove RT58 4 cyl detroit engine four part hook block,and jib.

APE Crane Sales & Leasing, LLC at 888-267-0003 - 2019 BRODERSON RT-300-2G
15-ton Capacity, 20'-0" - 60'-0" Four Section Boom, 20'-0" Offsettable Boom Extension, Hook Block and Ball, Cummins QSB4.5 Diesel Engine, Engine Block Heater, 4 Wheel Steer, 4 Wheel Drive, Deep Lug 17.5X25, 20-Ply Tires, Swing-down Style Outriggers, Rear Pintle Hook, All Weather Cab with Heater and Air Conditioner, Windshield Washer, Strobe Lights, Boom & Rear Work Lights, Greer MG586 Load Moment Indicator

CranesBoomandJib.com at 562-438-3860 - 1989 Lorain LCD 150 15 Ton Cab Down Rough Terrain CB&J#737
1989 Lorain LCD 150 15 Ton Cab Down Rough Terrain CB&J#737 · 22’ - 52’ 3 Section Full Power Boom · 15’ Swing Away Jib Offsettable @ 0, 15, and 30 Degrees · Main Winch · Angle Boom Indicator, Anti-Two-Block, Maximum Line Speed is 275 FPM (84 MPM), ½” Wire Rope · Hook Block · 8’ Wide Lorain4x4x4 Carrier · Cummins 4B3.9 80HP Engine · Automatic Transmission · 385/65R22.5 Tires · “A” Frame Outriggers · LOCATED IN MEXICO!

Western Pacific Crane & Equipment, LLC at 855-927-2637
2013 Badger CD4415 crane used as a crane demo. Low hours.

Hydraulic Crane Specialists at 251-675-0001 - Grove RT58C
Engine: Cummins Transmission: 3-Speed Powershift with Hi/Lo Drive: 4 x 4 Boom: 70' Tires: 20.5 - 25 Drum(s): 85% 1 Drum Paint: 60% Never wrecked, never flipped over, never flooded, never on fire or in any major accident. Will load out on customer's trucks in Saraland, Alabama or deliver to the Port of Mobile at no additional charge.

APE Crane Sales & Leasing, LLC at 888-267-0003 - 1994 Broderson RT300-2A Cab Down Crane
15-ton Capacity, Cummins Diesel, Enclosed Cab, LMI Computer, 60' Boom, 4WD, 4 Wheel Steer, Hook Block (new hour meter installed after complete rebuild 2010)

APE Crane Sales & Leasing, LLC at 888-267-0003
Location...Illinois. 15 Ton Capacity, 60' Boom, 20' Jib, Cummins Diesel Engine, Four Wheel Drive, Four Wheel Steering, Enclosed Cab, LMI (hour meter changed at 8,380 hours)

Mi-Jack Canada at 708-656-7700
Location..Alberta, Canada. LMI & anti-two block, load block & ball, Hook and Ball 7 ton capacity with hook latch, wheel and tire 20.5 x 25-24 ply, Air conditioner / Heater combination.

APE Crane Sales & Leasing, LLC at 888-267-0003
25 Ton Capacity, Cummins Diesel, 72' Three Section Boom, 43' Offsettable Jib, Four Wheel Drive, Four Wheel Steer, Hook Block & Overhal Ball, Enclosed Cab with Heat (Hour Meter Replaced at 5,318 Hours).

APE Crane Sales & Leasing, LLC at 888-267-0003 - 2003 Broderson RT300-2B Cab Down Crane
Location...Illinois. S/N...M900172. MAJOR RE-BUILD COMPLETE, 15 Ton Capacity, 60' Boom, 20' Jib, Cummins Diesel, Four Wheel Drive, Four Wheel Steering, Enclosed Cab, RCl Computer.