40 recent views
Your Price:
Equipment Specifications:
Year:
2015
Boom:
154'
Capacity:
100.00
Jib:
58'
Condition:
Very Good
Hours:
9,800 as of…
Unit #:
564
Serial #:
Verify
Location:
Texas, USA
Seller Contact:
CranesList
Jeffery Lomas
562-743-2338
562-856-4475 (alt)
562-856-4475 (fax)
3350 East 7th Street, Long Beach, CA 90804, USA
Seller Notes:

2015 Tadano GR1000XL, 100 Ton, Rough Terrain Crane; CranesList ID: 564,

  • 39.4' -154.2' Five Section of round box construction synchronized telescoping boom with seven sheaves at boom head and auxiliary lifting sheave,
  • 33' - 58' Two stage bi-fold lattice type with 3.5, 25 or 45 degree offset Jib - Assistant cylinders for mounting and stowing, controlled at right side of superstructure,
  • Main and Auxiliary Winches with 3/4" wire rope,
  • Two Speed,
  • Drum Rotation Indicator (audible and visible type), 
  • Tadano electronic Load Moment Indicator system (AML-C) including:
    Control lever lockout function,
    Boom position indicator,
    Outrigger state indicator,
    Boom angle / boom length / jib offset angle / jib length / load radius / rated lifting capacities / actual loads read out
    Ratio of actual load moment to rated load moment indication, 
  • Anti-Two Block (overwind cutout),
  • Hook Ball & Hook Block,
  • 22,000# Counterweights,
  • Self-removable counterweight, 
  • Continuous 360 full circle slewing on ball bearing turntable,
  • Outrigger controls and sight level in the operator's cab,
  • 10.88' Wide Tadano 4 X 4 X 4 drive and steer Carrier,
  • Cummins QSB6.7L 6 Cylinders, 4 cycle, turbo charged and after cooled, 270 HP, Tier 4 Diesel Engine,
  • Exhaust Brake,
  • Electronically controlled full automatic transmission. Torque converter driving full powershift with driving axle selector. 6 forward and 2 reverse speeds, constant mesh. 3 speeds - high range - 2 wheel drive; 4 wheel drive - 3 speeds - low range - 4 wheel drive,
  • Air Conditioner and Heater, 
  • Front and Rear Tires: 29.5 x 25 34PR(OR), 
  • Four hydraulic, beam and jack outriggers. Vertical jack cylinders equipped with integral holding valve. Each outrigger beam and jack is controlled independently from cab. Beams extend to 23' 11-3/8"  center-line and retract to within 10' 10-1/2" overall width with floats,
  • Current Certification.

http://www.CranesList.com

 

LOCATED IN TEXAS!

Calculator is for Estimation Purposes Only