Loads can be moved more precisely due to the standard Soft Stop

Maximum precision and safety due to optional AOS

High value retention thanks to coating technology

More lifting power due to S-HPLS

Additional applications with Power Link Plus

Increased comfort and safety due to Soft Stop

Specs

Max. lifting moment: 11.4 mt

Max. hydraulic outreach: 14.1 m

Max. manual outreach: 16.1 m

Slewing angle: 400°

Slewing torque with 1 gear: 1.3 mt

Stabilizer spread (std): 3.2 m

Fitting space required (std): 0.70 m

Width folded: 2.38 m

Max. operating pressure: 365 bar

Dead weight (std): 1160 kg

Product Features

KTL

The right surface treatment is the foundation for durable and long-lasting surface protection. The components pass through the priming and painting process stages fully automatically. Through this innovative technology for surface coating, PALFINGER creates a quality standard that is usually only found in the automobile industry.

HOW IT WORKS

1. The crane components are cleaned of all impurities by means of cut steel shot blasting.

2. The components are degreased, rinsed, activated and coated with zinc phosphating in the individual immersion tanks.

3. After two additional rinsing processes, the surfaces are passivated as well as rinsed with ultra-pure water.

4. The electrostatic cathodic dip painting follows by immersing the crane components completely in the paint.

5. Excess paint is washed off in two additional operations with an ultra-filtration rinse.

6. Afterwards, the paint is cured at a temperature of 115 degrees for 1.5 hours.

7. At the end, the crane components are given a water-soluble, environmentally friendly two-component finish coat of paint by a painting robot.

PALTRONIC 150

With the PALTRONIC 50 and PALTRONIC 150, PALFINGER offers the latest control electronics for the series production crane. The most important safety and comfort functions include:

Overload cut-off

Stability control (HPSC)

High Power Lifting System (HPLS)

Active Oscillation Suppression system (AOS)

Dual Power System plus (DPS plus) in the fly jib insert

HOW IT WORKS

The PALTRONIC controls and monitors the crane.

Pressure sensors on the cylinders send information on the capacity utilisation of the crane to the PALTRONIC.

Position sensors send information on the position of the boom system, the slewing gear or the stabilizer support to the PALTRONIC.

Based on the incoming signals, the PALTRONIC decides on shutting down or activating systems.

HPSC

The High Performance Stability Control (HPSC) is a fully proportional system for monitoring the stability of the crane vehicle. Sensors for proportional path measurement in the stabilizer supports permit completely variable support positioning. Hence, the permissible, safe working range can be calculated for any support situation.

HOW IT WORKS

The HPSC system calculates the permissible working range for any slewing angle of the boom system and for any support situation. The position of the stabilizer support is detected by means of a cable extension transducer or magnetostrictive position sensor. Based on the intelligent calculation algorithm developed by PALFINGER, it works more efficiently than comparable systems that are available in the market.

RADIO REMOTE CONTROL

Today, radio remote controls are often considered to be standard equipment when it comes to modern loader cranes. PALFINGER radio remote controls are equipped with a choice of a linear lever or cross lever and provide the greatest possible comfort of the operator. For cranes with PALTRONIC an LCD graphic display or 4.1 inch TFT- colour display informs the crane operator of the different operating conditions.

HOW IT WORKS

The remote control console (transmitter) is responsible for transmitting the commands made on the levers to the receiver. The receiver forwards the signals to the electronics, which convert them into crane movements by means of hydraulic control valves.