2007 Elliot-International G85R, 5,900#, Bucket Truck Crane; CranesList ID: 752,

NOW $93,000

• 26' - 41.5' Four Powered Boom Sections,
• 87' Maximum Working Height
• 61' Maximum Side Reach,
• Work Platform: 30” x 54" EZR end- hung work platform with 40" high rails. Equipped with two safety lanyard attachment loops and two safety harnesses and 72" lanyards. Platform capacity 500 lbs,
• Lower Controls: Mounted on roadside of turret,
• Platform Controls: Three individual proportional electronic controllers meter pilot-operated, pressure-compensated modulating valves. Remote controls for boom operations from platform operate from a removable remote control box. Hi/Lo range, start/stop and engine speed toggle controls are also located at platform. Electric remote control cable extends through the electrical slip ring to cable carrier on side of boom to extending boom sections,
• Platform Leveling System: Hydraulic "closed" system consisting of twin platform cylinders interacting witha boom-actuated master cylinder mounted in boom support turret. System provided with factory-set relief valves to compensate for oil expansion or overload during platform leveling operation. Remote releveling controls provided in platform and at ground controls to give precise releveling capability,
• Miller Bobcat welder/generator,
• Rear Mounted behind the cab of a International 7400 Tandem Axle Truck,
• Cab Equipment: PTO cable or switch with indicator lights installed in truck cab. Engine speed control and start/ stop installed with control switches in platform remote control box and also located at lower controls. U/L approved 5:BC dry chemical fire extinguisher installed in truck cab,
• 2006 year model International DT466​​​​​​, 8.6 Liter, 300 HP,  ​Diesel Engine, Emission Family No. 6NVXH0466AEA, Label No. 1871936C1, Engine Serial Number: 466HM2U2162792,
• Eaton Fuller Manual Transmission,
• Air Conditioning and Heater,
• Front and Rear Tires: 11R 22.5, 
• Outriggers: "A” type auxiliary outriggers with 12’ spread. "MH" type out and down main outriggers with 18’,
• Outrigger Controls: Parallel open- center stack valve for lever-operated control of right and left outriggers. The outrigger valves are mounted at the rear, under each corner of thebed with roadside valve controlling roadside outriggers and curbside valve controlling curbside outriggers,
• Storage Lockers,
• No known mechanical or other issues,
• 2,366 PTO hours as of 11.2022
• Certified.
• LOCATED IN NORTHERN CALIFORNIA!

2002 Link-Belt HTC8670LB, 70 Ton, Hydraulic Truck Crane; CranesList ID: 841,

NOW $142,500 USD

• 41'- 127' 4 Section Five Sheave Full Power Boom with Auxiliary Lifting Sheave,
• 39.5’ – 67’ Two–piece (bifold) lattice fly (Jib), stowable, offsettable to 2°, 20° or 40°,
• Main and Auxiliary Winches with 3/4" wire rope,
• Mechanical Boom Angle Indicator, Drum Rotation Indicator, 2 Speed, Rated Capacity Limiter Microguard 434 Graphic audio–visual warning system built into dash with anti–two block and function limiters,
• Joystick Controls,
• Hook Ball,
• Hook Block - SUBJECT TO FINAL CONFIRMATION,
• 12,000# Counterweights three piece design - SUBJECT TO FINAL CONFIRMATION,
• Hydraulic Outriggers with stowable 24" Diamete
• Upgradeable to 75 tons,
• 8' 6"' Wide 8 x 4 Link-Belt Drive Carrier,
• Detroit DDEC Series 60 11.1L 365 H.P. Diesel Engine with Jake Brake - AS PER LINK-BELT SPECIFICATIONS & SUBJECT TO FINAL CONFIRMATION,
• Eaton RTO–14909ALL; 11 speeds forward, 3 reverse Transmission  - AS PER LINK-BELT SPECIFICATIONS & SUBJECT TO FINAL CONFIRMATION,
• Heaters in both cabs,
• Tire Size Front: 445/65R22.5 with Aluminum Wheels, 
• Tire Size Rear: 12R22.5 with Aluminum Wheels, 
• Hydraulic Outriggers with stowable 24" Diameter Aluminum Floats,
• Hand–held outrigger controls and sight level bubble located on left side of cab,
• 5th Front Outrigger,
• Confined Area Lifting Capacities (CALC) System operational in one of three outriggers positions: Full Extension, intermediate, and Full Retraction.

• LOCATED IN CONNETICUT!

1978 Link-Belt HC218, 82 Ton, Lattice Boom Truck Crane; CranesList ID: 689,

NOW $34,900 USD

• 200' Main Tubular Boom,
• Mid point Pendant Lines,
• 45' Jib,
• Cummins Diesel Engine Up,
• Twin Disc Torque Convertor,
• Main and Auxiliary Winches with 3/4" wire rope,
• Boom Angle Indicator, Drum Rotation Indicator, Cranesmart Load indicator,
• Hook Ball,
• Five Sheave Hook Block,
• 21,000# A Upper Counterweights,
• 11' Wide Link-Belt 8 x 4 Carrier,
• Cummins Diesel Engine,
• Eaton Fuller Roadranger RTO-915 15 Speed Forward and 3 Reverse Transmission - AS PER LINK-BELT SPECIFICATIONS & SUBJECT TO FINAL CONFIRMATION,
• Front and Rear Tires: 14:00 X 24J 18 Ply - SUBJECT TO FINAL CONFIRMATION DURING TIME OF INSPECTION,
• 10,800# Bumper Counterweight,
• Full width, double box Front and Rear Hydraulic outriggers,
• Firth Front Outrigger,
• Storage Bins.
• LOCATED IN TEXAS!

1982 Link-Belt HC238B, 140 Ton Lattice Boom Truck Crane; CranesList ID: 688,

NOW $79,900 USD

• 200' Pin Connected Tubular Main Boom,
• Mid-Point Pendant Lines,
• 45' Jib,
• Cummins Diesel Engine Up,
• Three Stage Torque Convertor,
• Main and Auxiliary winches with 1" Wire Rope,
• Drum Rotation Indicator, 
• Overhaul Ball,
• Three Sheave Hook Block,
• Five Sheave Hook Block,
• A&B Counterweights 30,000# each - 60,000# Total - AS PER LINK-BELT SPECIFICATIONS & SUBJECT TO FINAL CONFIRMATION,
• 11' 10" Wide Link-Belt 8 x 4 Carrier,
• Cummins Diesel Engine,
• Eaton Fuller 10 speed Forward and 3 Reverse Transmission - AS PER LINK-BELT SPECIFICATIONS & SUBJECT TO FINAL CONFIRMATION,
• Front and Rear Tires: 14:00 X 24L - AS PER LINK-BELT SPECIFICATIONS & SUBJECT TO FINAL CONFIRMATION,
• 11,400# Front Bumper Counterweight,
• Full width double box Hydraulic outriggers,
• 5th Front Hydraulic Outrigger,
• Removable outrigger box,
• Storage Bins,
• LOCATED IN TEXAS!