|
|
|
1996 Link-Belt HTC8670, 70 Ton, Hydraulic Truck Crane; CranesList ID: 860,
$107,900 usd
- 38'-115' 4 Section Five Sheave Full Power Boom with Auxiliary Lifting Sheave,
- 36.5'- 61' Stowable Swingaway Bifold Fly/Jib Off-settable to 2°, 20° and 40°,
- Main and Auxiliary winches with new 3/4" wire rope,
- Drum Rotation Indicator, 2 Speed, Electric Boom Angle and Length Indicator in Microguard 434 Rated Capacity Limiter, Anti-two-Block,
- Hook Block and Hook Ball,
- 16,000# Counterweights,
- 8' 6" Wide 8 x 4 Link-Belt Drive Carrier,
- Detroit DDEC Series 60 11.1L 365 H.P. Diesel Engine with Jake Brake,
- Eaton RTO–14909ALL; 11 speeds forward, 3 reverse Transmission - AS PER LINK-BELT SPECIFICATIONS AND SUBJECT TO FINAL CONFIRMATION,
- Air Conditioning,
- Heaters in both cabs,
- Tire Size Front: 445/65R22.5,
- Tire Size Rear: 12R22.5,
- Hydraulic Outriggers with stowable 24" Diameter Aluminum Floats,
- 5th Front Outrigger,
- Confined Area Lifting Capacities (CALC) System operational in one of three outriggers positions: Full Extension, intermediate, and Full Retraction,
- Certified.
- LOCATED IN OREGON!
|
|
SELLER WILL DELIVER TO SEATTLE OR PORTLAND INCLUDED IN THE PRICE
|
|
|
|
1973 Manitowoc 4000W, 150 Ton, Lattice Boom Crawler Crane; CranesList ID: 857,
$162,500 usd
- 180' Total Main Boom consisting of 70’ X 95” X 95”of basic No. 22A Angular Lattice Boom (30’ Base and 40’ Open-Throat Tip Section) 110’X 95” X 95” of 22A boom inserts, Some lattices require repair but not enough to keep any of the boom from being utilized on the crane.
- 40’ of No. 123 Fixed Lattice Jib (15-ton maximum capacity),
- Gantry Lifting Device,
- Main and Auxiliary Winches with 1 1/8" wire rope,
- Vicon Power lowering, Boom Angle Indicator, Anti Two Block,
- Independent Dual Drum Boom Hoist, Swing and Travel,
- Hook Ball,
- Hook Block,
- 104,400# Three Section Self-Removing Counterweights,
- 18' 7" wide carbody with crawlers retracted,
- Caterpillar 3406D1 Diesel Engine, Serial # 90U1785,
- CAT Diesel had new starter and Turbo installed in 2023,
- VICON” (Variable Independent Control) power transmission provides independent power through two torque converters. Front converter powers hoisting drums while the rear converter powers the swing and travel machinery,
- Heater,
- 48" wide crawler treads,
- 52 pads per crawler,
- Runs like new,
- Crane is Certified!
- LOCATED IN ALASKA!
|
|
|
1989 Krupp KMK5100, 100 Ton All Terrain Crane; CranesList ID: 729,
$44,900 usd
- 43’ - 138’ Four Section Full Power Boom with Auxiliary Boom Nose,
- 38'- 62' Two Stage Extension (Jib),
- Main and Auxiliary Winches with 23mm Wire Rope
- Electronic Load Moment Safety Device And Anti-Two Block System,
- Mercedes-Benz OM 366 LA, 168 HP, 6 cylinders, water cooled Diesel Engine (Upper) - AS PER KRUPP SPECIFICATIONS AND SUBJECT TO FINAL CONFIRMATION.
- Hook Ball and Block,
- 9.8' wide Krupp 10 x 8 Drive Carrier,
- Mercedes-Benz OM 424 420 HP, 12 cylinders, Water Cooled Diesel Engine - AS PER KRUPP SPECIFICATIONS AND SUBJECT TO FINAL CONFIRMATION.
- Allison 5 Gear Automatic Powershift, CLBT 754 Transmission,
- Front and Rear Tires: 16.00 R25 - AS PER KRUPP SPECIFICATIONS AND SUBJECT TO FINAL CONFIRMATION.,
- 2nd, 4th and 5th axles with transverse differential lock, 4th axle with longitudinal differential lock,
- Power Steering leaks,
- LOCATED IN ONTARIO CANADA!
|
|
|
2020 Heila-Kenworth, HLR70000-3S, 30 Ton, KnuckleBoom Crane; CranesList ID: 869,
$339,000 usd
- 28′ Three Hydraulic Articulating Boom Sections,
- Horizontal Cap: 60,000 lb @ 8′, 37,000 lb @ 13.5′, 7,500 lb @ 18.5′, 20,000 lb @ 23′, 14,300 lb @ 28′
- DANFOSS Proportional Valve Controls – Single Sided Operator Control Station
- SCANRECO Wireless Radio Remote Included,
- Centered Knuckle with No Offset,
- Dual Main Lift Cylinders and Dual Extension Cylinders,
- Planetary Pedestal – Continuous Boom Rotation,
- Load Holding Valves on All Cylinders,
- 2 Batteries for Remote 50′ Backup Cord,
- Rear Mounted behind the cab of a 2020 Kenworth T880 Six Axle (Including Pusher Axles) Double Frame Truck,
- Hardwood Deck - 8′ Wide with Standard Rub Rail All Around, 60″ Headboard Behind Cab, Sliding Track on Passenger Side w/8 Winches, Dual Front Access Ladders, Winch Bar & Winch Bar Holder,
- Cummins ISX-15 600 HP Diesel Engine with Jake Brake,
- Eaton 18 Speed Ultrashift Transmission,
- Front and Rear Tires: 425/65/R22.5 Tires with Aluminum Rims,
- GPS Navigation System
- AM-FM/CD Player/Weather Band,
- Heated Mirrors,
- Power Windows & Door Locks,
- Air Conditioning,
- 120-Gallon Fuel Tank,
- Chalmers Supension,
- Hydraulic Out & Down 2-Sided (Independently Controlled) Stabilizers,
- 36" Storage Box installed under the deck,
- Fleet-maintained, one-owner machine,
- Certified.
- LOCATED IN NORTH CAROLINA!
|
|
|
|
|
|